Common Toilet Issues and Solutions
10/3/2022 (Permalink)
Toilet overflow is a common cause of water damage in homes and commercial buildings. Toilet issues are just as common and can also lead to toilet overflow. Here are some tips to solve some toilet issues so that you can prevent toilet overflow.
- “Phantom Flushes”
Sometimes, you hear your toilet to refill randomly like someone had just flushed it. The cause of this is a slow leak from the tank of the bowl. The problem is most likely caused by a bad flap or flapper seat. The solution is to drain the tank and bowl and then inspect the flapper and clean the flapper seat. You should replace the flapper if it is worn out or damaged. - Trickling Water
If you hear a prolonged hissing noise coming from your toilet, it might be water trickling from the supply line. To check this, inspect the refill tube and ballock or the inlet-valve assembly. The hissing sound is usually caused by water coming through the inlet valve. To solve this issue, check whether the float is sticking or needs adjusting then check the refill tube isn’t too far into the overflow tube. If neither of these solves the problem, you may need to replace the ballcock assembly. - Bowl Empties Slowly
This also known as a weak flush, which is a result of a clogged hole underneath the rim of the bowl. Use a curved piece of wire, such as a coat hanger wire, and gently poke into flush hole to clear out any debris. Be careful not to scratch the bowl.
- Clogs
These are the most common toilet problems that people have. A force-cup plunger is a very effective way to clear minor clogs. For serious clogs, use a closet auger. You would insert the end of the auger into the drain hole and then twist the handle and make sure to try to not scratch the bowl.
If you experience any toilet overflow that may have caused water damage in your property, please call SERVPRO of Lansdale, Warminster, Blue Bell, and Abington Jenkintown to give you a free estimate at 215.368.4110!